4
2618000900_31-E0070
125 x 90 mm
for at least 5 hours, but no more than 24 hours.
Connecting to TK-L19 via Bluetooth
1) Turn on the device by pushing the ON/OFF switch.
2) After turning on, the device is always in Bluetooth mode. The blue
LED is on and the device displays the message: “The Bluetooth
mode”. The TK-L19 indicates readiness for pairing by the flashing
of blue and green LED.
3) Activate Bluetooth on your device. Choose the function for
searching for nearby Bluetooth devices.
4) Select TK-L19 from the list of available Bluetooth devices. The
device will indicate successful pairing with a tone and a blue
LED indicator.
5) You can begin playing your favourite MP3 music files or play audio
from videos. After pairing, you can also use the TK-L19 to control
your device (phone, tablet etc.). Using the control button “Next”
and “Previous”, you can browse through tracks, control volume
using “Vol+” and “Vol-” and pause/resume playing using the “Play/
Pause” button.
6) TK-L19 can also be used as handsfree for receiving phone calls
(only within range of the connected paired telephone). For
incoming calls, the TK-L19 will announce the caller’s number.
- press “ON/OFF” (1) to receive call.
- press “ON/OFF” (1) to hang up the current call.
- press “MODE” (2) to reduce the ringtone volume.
Note:
If the maximum operating distance between your device and TK-L19
is exceeded, communication will be disrupted and the device dis-
connected. To pair the devices again, come closer to the TK-L19. The
connection will resume automatically. The normal operating distance
between the TK-L19 and the Bluetooth device is approximately 10 m.
Before connecting the Bluetooth device, please read the manual for
the device you wish to connect. Mutual compatibility between TK-L19
and Bluetooth devices is not guaranteed. Any obstacles between the
TK-L19 and the Bluetooth device may reduce the range and maximum
operating distance. To limit potential interference, do not use TK-L19
in the vicinity of other electronic devices.
Tip:
If you cannot connect your device to the TK-L19, delete all saved
paired devices in your device settings (even those that are not
currently in range). Turn Bluetooth on/off and repeat the search for
nearby Bluetooth devices.
Connection to TK-L19 does not require a PIN code.
Using the Radio
1) Plug the USB cable which serves as an external antenna to the
recharge microUSB connector of TK-L19. Do not connect the
other end of the cable to any other device or power source.
2) Turn on the device by pressing “ON/OFF” (1).
3) After turning on, the device is always in Bluetooth mode.
4) To activate FM radio, shortly press the “MODE” (2) button. The
receiver will announce “FM MODE” and a green LED will light up.
5) After switching the TK-L19 to FM radio mode, the last radio station
selected will automatically begin playing.
6) To automatically tune and save all stations into the device
memory, shortly press the “ON/OFF” (1) button.
7) Adjust volume using Vol+/ Vol-.
8) To switch between saved radio stations, use buttons “Next/
Previous” (5, 6).
Playing Music from USB, MicroSD/TF Card
TK-L19 is capable of playing MP3 files stored on a USB device or a
microSD card.
1) Turn on the device by pushing the ON/OFF switch.
2) Before plugging the USB device into the USB port, make sure
the USB cable is rotated correctly to fit the port. For SD/MMC/TF
cards, insert them straight and limit bending of the card.
3) TK-L19 will announce “Play by USB drive” and will begin playing
MP3 files.
4) Using the “Next/Previous” (5, 6) buttons, you can switch between
tracks, adjust volume using “Vol+” and “Vol-” and pause the
playback by pressing “ON/OFF” (1).
Note:
Inserting the USB/microSD medium incorrectly may damage both
the medium and TK-L19.
Specifications:
Output power: max. 6 W/4 Ω
Operating voltage: 3.5–4.2 V
Frequency range: 40 Hz–20 kHz
S/N ratio: 80 dBA
Distortion: <1 %
