5
4. Use the double-sided adhesive tape (included) or two screws to
fix the back of the mounting pad to the wall. Although the button
is weather resistant, choose a location where it is protected,
e.g. in a wall recess.
5. Fit the mounting pad back onto the button.
6. Press the button to ring the chime. Pressing is accompanied by
LED illumination indicating the button has sent a radio signal.
The chime plays the selected ringtone.
Note: The doorbell button (transmitter) can be placed on wood or
brick walls without issue. However, never place the button directly
onto metal objects or materials containing metal, such as plastic
windows or doors that have a metal frame. In such cases, the
transmitter will not work properly.
Upkeep and Maintenance
The wireless digital doorchime is a sensitive electronic device.
Therefore, it is necessary to observe the following precautions:
• The chime (receiver) is designed for indoor use in dry envi-
ronments only.
• Periodically check the functioning of the doorbell button and
replace the battery in a timely manner. Use only quality alkaline
batteries with the prescribed parameters.
• When the doorchime is not used for a long time, remove the
batteries from the chime and the button.
• Do not subject the button or chime to excessive vibrations
and shocks.
• Do not subject the button or chime to excessive heat and direct
sunlight or moisture.
• To clean the device, use a slightly moistened cloth with a small
amount of detergent; do not use aggressive cleaning agents
or solvents.
• This device is not intended for use by persons (including chil-
dren) whose physical, sensory or mental disability or lack of
experience and expertise prevents safe use, unless they are
supervised or instructed in the use of the appliance by a person
responsible for their safety. Children must always be supervised
and must never play with the device.
Summary of Contents for P5732T
Page 2: ...2 1 2 3 1 4 2 3 5 6 1 2 1 2 3 4 ...
Page 51: ...51 ...
