5
7. Setting Code for Zone 2
– Enter programming mode; an orange diode will light up.
– Press * and 4; the orange diode will begin flashing.
– Enter code position between 00–99 (e.g. 01, 02, …, 99).
– If a red LED indicator lights up, an entry code is already stored in that position. You
can delete it by double pressing the asterisk key.
– If a green LED indicator lights up, the position is vacant.
– Enter a four-digit code or use an RFID fob, card or sticker. Successful entry is
confirmed by a long beep.
– Press the hash (#) key to exit programming mode or wait for ca 30 s.
8. Setting Time for Activating Relay for Zone 1
– Enter programming mode; an orange LED indicator will light up.
– Press * and 1; the orange LED indicator will begin flashing.
– Entering 00–99 sets time in seconds (00 is used in combination with an electronic
security system). Successful setting is confirmed by a long beep.
– Press the hash (#) key to exit programming mode or wait for ca 30 s.
9. Setting Time for Activating Relay for Zone 2
– Enter programming mode; an orange LED indicator will light up.
– Press * and 5; the orange LED indicator will begin flashing.
– Entering 00–99 sets time in seconds. Successful setting is confirmed by a long beep.
– Press the hash (#) key to exit programming mode or wait for ca 30 s.
10. Resetting Codes
– Enter programming mode; an orange LED indicator will light up.
– Press * and 8; the orange LED indicator will begin flashing.
– Entering 88 erases all saved codes. Successful deletion is confirmed by 6 beeps.
– Entering 99 erases all saved codes, set times and resets the main code for entry
into programming mode to 12341234. Successful deletion is confirmed by both
LED indicators lighting up in orange, and ends with a long beep.
– Press the hash (#) key to exit programming mode or wait for ca 30 s.
11. Restoring Forgotten Programming Password
If you forget the password for entering programming mode, unplug the keypad from
power supply, press the hash (#) key and restore power supply. The code for entry will
be reset to the default 12341234 after 15 seconds.
12. Key sound indication
(only model DH16A-30DT, H8011)
– Enter programming mode; an orange LED indicator will light up.
– Activation – press * and 203.
– Deactivation – press * and 204.
Entry Control:
– Enter the pre-set code on the keypad.
– If the code matches a code in the memory, the keypad will release the relay for
the given zone.
– If the code does not match, the keypad will beep 3×.
–
If the code is entered 5× incorrectly, the keypad will be locked for 60 seconds.
