3
3
140–170 cm
40 cm
FAB
ASSA ABLOY
FAB
ASSA ABLO
Y
12V DC
GB | Colour Video Doorphone Set
Package Contents
videomonitor
1 pc
mounting frame for monitor
1 pc
door camera unit
1 pc
power supply
1 pc
mounting screws
6 pcs
connectors
2 pcs
Technical Description of Videomonitor
(see Fig. 1)
1 – gate opening
2 – monitor (image activation)
3 – intercom
4 – lock
5 – talk
6 – voice and ringtone volume
7 – menu/OK
8 – exit
9 –
10 –
Installation
Choosing a Place for Installing the Monitor
Take into account the need for cables when choosing a place for installing the device. It is recommended that the device be
placed at eye level of the user.
Installation of Mounting Frame under the Monitor
Place the frame on the mounting spot, mark out the locations for mounting holes and drill them into the wall. Sufficient space
must remain in the centre of the mount for cables to the monitor (cable from the camera, power supply cable). Attach the
mount using screws; you can also add wall plugs.
Attaching Cables
Connect the camera to the monitor by plugging a cable into the terminals shown on the diagram.
Suspending the Monitor
Gently press the monitor to the holder so that the protrusions lock into the openings at the rear of the monitor. Pushing the
monitor slightly downwards will fix it in place.
Connecting the Device to Power
Connect the power supply to a network which meets the 230 V/50 Hz parameters of the device.
Plug the power supply connector (output) into the prescribed socket at the rear of the videomonitor.
Video-doorkeeper Wiring Diagram
Terminal description (see Fig. 2)
Installation of the Door Camera Unit
(see Fig. 3)
Door camera unit on plaster – apply a layer of silicone between the wall and the door unit to prevent humidity from entering
under the door unit. The silicone should be applied on the top and the sides. The bottom side must be left open to allow
humid air from exiting the space under the door unit.
Parameters of Interlinking Cables
For distances under 20 m, use a quality UTP CAT.5 cable (optimally CAT.6)
For distances over 20 m, we recommend a SYKFY 5 × 2 × 0.5 or 10 × 2 × 0.5 cable. To achieve higher diameter, cables can
be doubled or tripled.
