6
Alarm Settings
The weather station allows you to set 2 separate alarm times.
Repeatedly press the ALARM button and select alarm time no. 1 (A1) or alarm time no. 2 (A2).
Then, long press the ALARM button and set the desired alarm time.
You can set the time values by repeatedly pressing the +/- buttons.
To confirm the hour/minute value you set, press the ALARM button.
After setting the alarm time, repeatedly press the ALARM button, and then repeatedly press the – button
upon A1 or A2 appearing on the display.
If field no.11 shows the icons of an active alarm no.1/no.2, the alarm is active.
The alarm will then sound at the set time.
If field no.11 does not show the icons of an active alarm no.1/no.2, the alarm is inactive.
Snooze Function
The alarm ringing can be delayed by 5 minutes using the SNOOZE/LIGHT button located on the top
part of the weather station.
Press the button when the alarm starts ringing. The alarm icon and Zz icon will be flashing.
To cancel the SNOOZE mode, press any other button – the icon will stop flashing and will remain on
the screen.
The alarm will be re-activated the next day.
If you do not press any button while the alarm is ringing, the ringing will stop automatically after
2 minutes.
Display Backlighting
Press the SNOOZE/LIGHT button to activate display backlighting for 5 seconds.
Indoor and Outdoor Temperature, °C/°F Temperature Unit Setting
Indoor temperature is displayed in field 18.
Outdoor temperature is displayed in field 5.
Short pressing the - button on the weather station will switch temperature units between °C/°F.
Set the desired °C/°F temperature unit on the sensor display by short pressing the °C/°F button in the
battery compartment of the sensor.
Displaying Maximum and Minimum Temperature Readings
Press the + button repeatedly to gradually display the maximum and minimum readings of indoor
and outdoor temperature.
When in the MAX/MIN display mode, you can erase the memory by long pressing the + button.
Temperature Trend
The icon for outdoor temperature trend is shown in field 4.
The icon for indoor temperature trend is shown in field 21.
temperature trend
indicator
falling
constant
rising
Weather Forecast
The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24 hours
for an area within the range of 15–20 km.
The accuracy of weather forecast is approximately 70 %. As the weather forecast may not be 100 %
accurate, neither the manufacturer nor the seller can be held responsible for any loss caused by an
incorrect forecast. When you first set or reset the weather station, it takes approximately 12 hours before
the weather station begins forecasting correctly. The weather station shows 5 weather forecast icons.
Note: Currently displayed icon means a forecast for the next 12–24 hours. It may not reflect the current
state of the weather.
