4
Pairing the Sensor with the Weather Station
The weather station can be paired with up to 3 wireless sensors.
1. Choose the desired channel – 1, 2, or 3 – for the sensor by repeat-
edly pressing the
button on the station.
2. The number will then be displayed on the station's screen on the
top left in the icon .
3. Then, long press the
button on the station; the icon will
start flashing.
4. Remove the battery compartment cover on the back of the sensor
and insert batteries (2 x 1.5 V AAA).
5. Set the required sensor channel number (1, 2, 3) by sliding the
CH button located in the battery compartment of the sensor.
The channel number will be shown on the sensor's display. Data
from the sensor will be loaded into the station within 3 minutes.
6. If the sensor signal is not detected, remove the batteries, reinsert
them and repeat the process.
Safety Instructions and Warnings
Read the user manual before using the device
Follow the safety instructions stated in the manual
The product is designed to serve reliably for many years if used
properly.
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and
humidity and sudden changes in temperature.
• Do not place the product in locations prone to vibration and
shocks – these may cause damage.
• Do not expose the product to excessive force, impacts, dust, high
temperatures or humidity - these may cause malfunction, shorter
battery life, damage to batteries and deformation of plastic parts.
• Do not expose the product to rain or moisture if it is not designed
for outdoor use.
• Do not place any open flame sources on the product, e.g. a lit
candle, etc.
• Do not place the product in places with inadequate air flow.
• Do not insert any objects in the product vents.
Summary of Contents for E08825
Page 2: ...2 1 2 1 3 5 2 4 ...
