5
Manual Setting of Time and Date
1. 1. Long press the SET button.
2. 2. Use the UP/DOWN buttons to set: year – month – day – time zone – 12/24 time format – hours
– minutes.
3. 3. Press SET to move between the menu items.
Weather Forecast
The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24 hours
for an area within the range of 15–20 km. The accuracy of weather forecast is 70–75 %. As the weather
forecast may not always be 100 % accurate, neither the manufacturer nor the seller can be held respon-
sible for any loss caused by an incorrect forecast. When you first set or reset the weather station, it takes
approximately 12 hours before the weather station begins forecasting correctly.
The weather station displays 4 icons:
Sunny
Partly cloudy
Cloudy
Rain
Note:
Currently displayed icon means a forecast for the next 12–24 hours. It may not reflect the current
state of the weather.
Alarm Settings
The weather station allows the setting of one alarm.
Activate the alarm by pressing the SET button – the
icon will be displayed.
Another press of the SET button will deactivate the alarm – the alarm icon will disappear.
Long press the ALARM button and use UP/DOWN buttons to set the desired alarm time.
Move between values using the ALARM button.
Alarm Beeping Modes:
0–8 seconds – one beep per second
9–24 seconds – two beeps per second
25–56 seconds – four beeps per second
After 57 seconds – continuous beeping up to 2 minutes
Snooze Function (SNZ)
Use the SNZ button to delay alarm ringing by 5 minutes.
Press the button when the alarm starts ringing. The
Zz
icon will be flashing.
To cancel the SNOOZE function, press any button on the weather station (except for SNZ) – the
zZ
icon
will disappear. The alarm will be re-activated the next day.
The alarm ringing will be active for 2 minutes if no button is pressed.
Max/Min Temperature and Humidity
Repeatedly pressing the
UP
button will show information about the maximum or minimum temperature
and humidity measured.
To erase the memory, long press the
UP
button when in the max/min display mode.
Temperature Alert
You can set a temperature alert for a maximum of 3 connected sensors.
Different temperature alert values can be set for each sensor.
Select sensor 1/2/3 by repeatedly pressing the CH button on the weather station.
