2
E0107 – WIRELESS THERMOMETER E0107T
Specifications
Main unit
Digital clock
Thermometer range:
Thermometer: -9 °C to +50 °C
Outer sensor: - 50 °C to +70 °C
Thermal resolution: 0.1 °C, precision (±1.5°C)
Temperature units: °C/°F
Sensor range: 60 m in free space
Broadcast frequency: 433 MHz
Thermometer power supply: 2 x 1.5 V AAA battery
Sensor power supply: 2 x 1.5 V AAA batteries,
protection IPX4
Main unit description:
Front display:
1 – outer temperature
2 – inner temperature
3 – time
Rear side:
4 – opening for hanging on a wall
5 – battery compartment
6 – stand
Button functions
Push
Hold
LIGHT
Backlighting
MAX/MIN Setting the display of the max/min temperature
UP
Higher value in the settings mode toggle °C/°F in the normal mode
DOWN
Lower value in the settings mode toggle 12/24 in the time mode Start searching for the DCF signal
SET
Switching among categories in the settings mode
Setting the time zone time
Wireless sensor:
A – LCD display
B – opening for hanging on a wall
C – battery compartment
Buttons under the cover of the battery compartment:
CH – choosing the channel for transmission
of data from the sensor to the thermometer
°C/°F – toggling the temperature units
Commissioning of the station:
1. Insert batteries to the thermometer first and then to the wireless
sensor
2. When inserting the batteries, respect the proper polarity. Use only alkali batteries of the same type and do not
use rechargeable batteries.
3. Wait till the thermometer automatically finds and reads the signal from the wireless sensor.
4. It will display the outer temperature data.
5. We recommend placing the sensor on your house’s northern side. Do not place the sensor on metal objects, it
would shorten its broadcast range. The sensor is resistant to weather, but do not put it on direct sunlight, snow
and rain. If a depleted battery icon appears in the outer temperature field, replace the batteries in the sensor.
When replacing the batteries, follow the station commissioning procedure.
Setting the time and date
1. Push and hold the SET button for 3 seconds – you will get into the setting mode and the “00” value will go blinking.
GB