4
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons for the event of a power failure. There is thus no
need to pair buttons again after a power cut.
Wiping the Memory of Paired Buttons
Press and hold the pairing button on the chime.
Plug the chime into a socket.
The LED of the chime will light up after ca. 5 seconds. Release the
button. The LED will turn off.
The memory of all paired buttons will be erased.
Installation of the Doorbell (Transmitter) Button
1. Begin by pairing the button with the chime.
2. Before installation, check that the pair works reliably in the
chosen spot.
3. Remove the rear cover by inserting a screwdriver into the hole
on the side of the button.
4. Use the double-sided adhesive tape (included) or two screws to
fix the rear portion of the cover to the wall. Although the button
is weather resistant, choose a location where it is protected, e.g.
in a wall recess.
5. Re-assemble the button.
6. Press the button to ring the chime. Pressing is accompanied by
LED illumination indicating the button has sent a radio signal. The
chime plays the selected ringtone.
Note: The doorbell button (transmitter) can be placed on wood or brick
walls without issue. However, never place the button directly onto metal
objects or materials containing metal, such as plastic windows or doors
that have a metal frame. In such cases, the transmitter will not work
properly.
Upkeep and Maintenance
The wireless digital doorbell is a sensitive electronic device. Therefore,
it is necessary to observe the following
precautions:
• The chime (receiver) is designed for indoor use in dry environ-
ments only.
Summary of Contents for 3402114000
Page 2: ...2 1 2 2 1 3 4 1 4 3 2 4 ...
Page 43: ...43 ...
