LCD DISPLAY CONTROLS
Please read the following steps and images to help you understand how
to read and operate all the functions.
Press the power button on the LCD screen module located near
the left grip on the handlebars to tum it on.
You can adjust the pedal assist power level to have more power
by hitting the [ +] button (top button) and can move to a lower
level power by hitting the [-] button (bottom button).
When not riding your bike, you can tum off the meter by holding
down the power button for several seconds.
10
•
Speed mode: average speed (AVG km/h),
maximum speed (MAXS km/h).
•
Speed display: display of the speed, km/h or mph.
•
Battery level: 10-segment battery indication; the
voltage that each segment represents can be
customized.
•
Headlight indication: only shows when headlight or
backlight are on.
•
Error display: When a fault is detected the wrench
symbol will be displayed.
•
Maintenance warning: When there is a need for
maintenance the symbol
SERVICE
will be displayed (riding distance or the number of
battery charge cycles exceed the set value,
function can be deactivated).
•
Level indication: The chosen level 1–5 will be
displayed; if there is no numeric display, it means
that there is no assistance (by the motor). If the
rider is walking and pushing the e-bike,
walk
will
be displayed.
•
Distance mode: display of the maximum speed
MXA, average speed AVG, the single-trip distance
TRIP, the total distance TOTAL, remaining
distance TO GO, power W, consume energy C.
•
Distance indication: display of the distance
depending on the setting.
•
Walk assistance
Press the
" i"
button to switch between distance and speed.
Single-trip distance (TRIP km) , total distance (TOTAL km)
maximum speed (MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and energy
consumption (C) are displayed in successive order.(Switch
mode interface as below)
•
Switch between distance and speed modes
Press the "-" button for 2 seconds. The e-bike enters the
walk assistance mode, and the symbol WALK is displayed.
Once the key is released, the e-bike will exit the walk as-
sistance mode.)
