EMobility LRT Home Essential+ 11kW, Operating Instructions Manual

Page: 11 / 16

LRT Home Essential 11/22kW operating instructions 11 / 16
5 Operation
DANGER
Warning of dangerous electrical voltage!
Touching electrical cables can result in a fatal electric shock.
→
Only use the charging station after it has been commissioned by a
qualified electrician.
→
Do not touch the plug connection on the charging cable, only on the
coupling of the charging cable.
→
When charging is complete, always close the protective cap at the end
of the charging cable coupling.
Requirements
→
LED indicator flashes blue: The charging station is ready for charging.
→
The vehicle is stationary.
Do not charge the electric vehicle when it is moving. It must come to a complete stop before charging is started
and must not move during charging.
Check the following points before each charging process:
→
Is the charging station firmly connected to the wall?
→
Is the housing undamaged and closed?
→
Is the charging cable undamaged?
The sheathing must not be cracked and no metal must be exposed.
If the answer to any of the three questions is no, immediately turn off the power to the charging station and contact
an electrician or customer service for repair work.
→
Is the coupling of the charging cable clean and dry?
If the charging cable coupling is wet or dirty, it can be cleaned with a clean and dry cloth.
Charging the vehicle
Plug the coupling of the charging cable into the socket on the vehicle side. The LED status indicator lights up blue as
soon as the vehicle is connected to the charging station. During the charging process, the LEDs light up green.
→
The vehicle locks the charging coupling and requests charging. As long as the charging process is running, the
charging coupling is locked. The charging cable can only be unplugged after the process has been
completed/cancelled.
Ending the charging process
When the vehicle is fully charged, the vehicle stops charging and releases the charging cable coupling.
→
Unplug the coupler from the vehicle-side socket.
→
Close the protective cap at the end of the coupling of the charging cable.
→
Wind up the charging cable on the holder of the charging station.
Cancelling the charging process
The charging process can be cancelled if the driver wants to use his vehicle before it is fully charged.
There are two options for cancelling the charging process:
→
via the controls in the vehicle,
→
by switching off the fuse on the building side.