SUPERIOR DENTAL HYGIENE
14
Onlineshop: emmi-dent.com
Application of the emmi®-dent Metallic 2.0
with 100% original emmi®-dent ultrasound.
After switching on the device, you will feel a slight vibration.
and hear a soft sound. Both have nothing to do with the actual
cleaning process. Since ultrasound can neither be seen, heard
nor felt, a small motor has been integrated into the hand piece.
The user feels and hears that the device has been switched on
and is ready for operation. For even better user control, a slight
beep is generated every 6 seconds.
Daily use
For your dental hygiene, we recommend you to clean your teeth
with the 100% Original Ultrasound of your emmi®-dent Metallic
twice a day for approx. 3 min.
1.
Moisten the bristles of the Ultrasound brush shortly under
running water.
2.
Apply a double pea-sized quantity of emmi®-dent Ultrasound
Toothpaste on the bristles of your Ultrasound brush head.
Only the emmi®-dent Ultrasound Toothpaste guarantees the
Original 100% emmi®-dent Ultrasound function. For more
details on the emmi®-dent Ultrasound Toothpaste, please
read under the separate section „emmi®-dent Ultrasound
Toothpaste“ in this user manual.
3.
Switch on the device and bray the Ultrasound Toothpaste uni
for-
mously on the inside and outside surfaces as well as on the
chewing sides of your teeth.
4.
The bristles of the Ultrasound brush head embrace 2 – 3 teeth,
according to the size of your teeth. Maintain the bristles gent-
ly and without pressure motionless on the inside, outside and
on top (chewing sides) of the teeth for approx. 6 seconds each
time. The actual duration depends on the amount of impuri-
ties on the teeth (plaque, nicotine, wine stains, etc.). In case of
acute problems, such as gingivitis or parodontitis, leave the
bristles for approx. 15 to 20 seconds on the affected sites. This
will result in a quicker and better healing. A longer application
does not harm your teeth, because the emmi®-dent Platinum
implements a gentle Ultrasound. When you have finished
your dental hygiene, move the bristles various times over your
teeth, in order to remove any further adherences or impuri-
ties. Then rinse your mouth with water or an oral rinse.
5.
After cleansing, wash the bristles and hand-piece under
running water. Switch off the device and dry the hand piece.
Please note that the bristles are free and clean from foodstuff
or other impurities. Now you can place the device with the
integrated Ultrasound brush head back on the charging dock.
1.
2.
