Instruction for use and Adjustment:
Ensure correct posture to avoid bodily harm and fatigue. Bring the seat and the back of the office chair into the appropriate
position. Adjust the seat height in such a manner that the top of the thigh is in a horizontal plan with respect to the working plane,
with the straight seat position. Feet are placed on the floor.
ATTENTION!
The gas lift may only be serviced or replaced by qualified personnel. Casters: The standard casters are suitable for textile flooring.
For laminate, cork, parquet and stone flooring, we recommend the use of type W casters and a floor protection mat. You can
purchase these wheels in your best DIY store
This chair is suitable for private use.
Only one person should sit on the chair.
The chair must not be used, unless all screws are fully tightened. Check this every 3 months.
If individual components of the chair are damaged or worn out, do not use the chair any more until these have been replaced.
Only trained staff may carry out change and work in the area of seat adjustment elements.
Dear Customer,
Congratulations on your purchase of this CONFORAMA product.
Please take a few minutes before starting operation of the swivel chair and read the following operating instructions.
We do not accept liability for any damages resulting from non-compliance. Maintenance: Check and tighten all screwed and
plugged connections in regular intervals. Attention! Tighten all screws only one or two revolutions. After fastening all screws and
adjusting the position of the pads and armrests, fully tighten all screws.
When the seat is occupied, the
office chair sinks downwards.
When the seat is unoccupied,
swivel chair rises up
Turn the adjustment lever(B) to
the right. The tension becomes
harder.
Wipe the frame using a lint-free duster or a soft moist mop. If the dirt is heavy, use diluted household cleaner. Scouring agents are
not suitable. Polish chromium and aluminum parts using chromium cleaning agent.
Vacuum-clean leather upholstery regularly.
Mover Lever(A) IN to
lock it. Move lever(A)
OUT to unlock it.
(A)
( C )
(B)
Care:
Wipe off dirt using a moist piece of cloth and dry it up using dry cloth. Use a leather-care medium occasionally.
Vacuum-clean the bolster with the correct nozzle and with feeling. Remove heavy dirt with dry foam.
Seat Height
Tilt Mechanism
Tension Adjustment
Pull lever(A) upwards.
Before starting to use, make sure
that the spring is not set too soft.
Turn the adjustment lever(B) to
the left. The tension becomes
softer.
