1. Do not continuously perform press-fittings so as
not to overheat the tool (also refer to the hydraulic
press-fitting tool manual).
Allow the hydraulic press-fitting tool to cool down
for 15 minutes every 50 press-fittings.
2. Do not reuse connectors.
3. Do not tamper with the equipment.
4. Periodically check the correct operation of the
equipment.
5. Carefully read the manual that accompanies the
hydraulic press-fitting tool.
6. Always keep the hydraulic press-fitting tool and
callipers clean.
WARNING!
Avoid connections with cast iron or miscali-
brated tapered threads since high tightening
torques cause the breakage of the female brass
fittings.
Sealing threaded connections must be done
in compliance with UNI 7129-1 and UNI 11528.
Contour
Dimension
A max
B max
B
16x2
16,40
17,70
B
18x2
18,60
19,80
B
20x2
20,40
21,70
B
26x3
26,40
27,70
B
32x3
32,40
33,70
TH
16x2
16,80
18,00
TH
20X2
20,80
21,80
TH
26x3
26,80
27,60
TH
32x3
32,60
33,40
13
GB
3. INTALLATION
GB
4. WARNINGS