emmeti EGWW-0712, Installation And Use Manual, Page: 46 / 112

46
GB GB
3. USE OF FAN
31
35
Tw
Fun start
Fun stop
Keep the state
Note:
Te : Environment temperature
Ts
: Set temperature
Tw : Water temperature
3.6 Operation in heating mode “Heat”

Press the MODE key to select the operating mode.

Use the
- +
keys to set the desired room temperature (16÷30 °C).
The temperature can be set degree by degree.
3
Pressing the FAN button, select the fan speed:
AUTO
Low Medium High Auto*
4
Pressing the button to select the desired position of the baffles.
AUTO
The unit is a hydronic terminal and its operating
mode depends on the chiller or boiler.
Attention!
The signal is automatically sent to the fan; the display will briefly show the
symbol .
Operation of the heating system
Ts
Ts+1
Te
Ts-1
- valve closed
- the fan remains stopped for 5 minu-
tes, and then restarts at MIN speed
for 1 minute.
- Internal temperature shown on the
display fixed Ts +2
- After 1 minute valve closed and the fan
is stopped
- the fan remains stopped for 5 minutes, and
then restarts at MIN speed for 1 minute.
- valve open
- fan running at set speed (MIN if
AUTO)
- valve open
- fan running at set speed (MED if
AUTO)
- valve open
- fan running at set speed (MAX if
AUTO)
- valve open
- fan running at set speed (MAX if
AUTO)
Ts-2