Page 6
GENERAL INSTRUCTIONS
•
Read the instructions contained in this booklet carefully as they provide important
information to ensure safe installation, use and maintenance.
• Keep this booklet for any further reference by the operators.
• After removing the packing, check that the appliance is not damaged.
• Should you have any doubts, don’t use the appliance and address to skilled technicians.
• Never leave the packing components (plastic bags, foamed polystyrene, nails, etc.) within the
reach of children since they are a source of potential danger.
• Before connecting the appliance check that the specifications indicated on the data plate (Pic. 1)
correspond to those indicated on the electrical mains system.
• The appliance should be used by trained personnel only.
• Before carrying out any cleaning or maintenance operations, insulate the appliance from the
electrical mains system.
• In case of damage or malfunctioning, always disconnect the appliance.
• Any repair intervention should be carried out only by an authorized after-sale servicing centre.
• Always request the use of original spare parts.
• The non-compliance with the above mentioned instructions may compromise the safety of the
appliance.
• This appliance must be used for the purpose for which it was designed.
• The installation should be carried out by qualified personnel in compliance with the instructions
provided by the manufacturer and with the regulations in force.
• Never wash the appliance with direct high-pressure bolts of water.
• Don’t obstruct the openings and the heat inlets and outlets.
• Always keep all the appliance elements clean to avoid any risk of corrosion or any damage by
irritating agent.
• Always disconnect the appliance when it is not in use.
• Electric safety of this appliance is assured only when it is properly connected to an efficient
earthing system, as provided by the electric safety regulations in force.
• It is necessary to check this basic safety qualification of the system by highly skilled personnel.
The manufacturer cannot be considered responsible for any damages caused by the non-earthing
of the installation.
• As for the electric system it is necessary to provide for a switch having a controls opening
distance equal or superior to 3 mm: for example:
- manual switch of proper capacity equipped with plug fuses;
- automatic switch with proper magnetothermic relays.
• The appliance is to be furthermore included in an equipotential system, whose efficiency must be
checked following the regulations in force.
• The connection is made by a ven marked by " Equipotential "
• The trailing cable for the connection to the electric line should have lower characteristics than the
one with H07RN-F rubber insulation.
