48
Go Double Adapter Super Viking Britax / Maxi 1.1
4
5
1
2
3
“Klick”
“Klick”
Attaching and using Go Double Adaptor
Attaching Go Double to the chassis
• Unfold the chassis
• The setting of the Emmaljunga Comfort System must be in the middle
position, otherwise Go Double will not fit to the chassis.
• Click in the Go Double Adaptor on the chassis
• and check that the front support on Go Double is positioned over the
top of the front wheel assembly on the chassis.
WARNING
• Always make sure that Go Double is correctly attached to the chassis
prior to use.
• Repeat step 1-3 with the other Go Double on the other side of the
chassis.
Using with two seat units
WARNING
• Note that the pram’s stability is immediately affected if you change
the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots,
car seats or place children in/remove children from the pram.
• Attach the first seat unit to Go Double
Summary of Contents for Go Double Adapter
Page 2: ...K j rg E riikid p...
