11
19
20
Manual Scooter 2.0 / Scooter S v. 2.2
42
12
13
How to use the vehicle
Using the raincover
• The picture shows how the raincover should be placed when it is
assembled correctly.
• The raincover is assembled by pulling the raincover with the ope
-
ning pocket over the handle. Then pull the raincover over the hood
and seat unit. Close the opening with the velcro strap. Please note
that the raincover has an opening on the hood.
• Always use the raincover that accompanies the pram.
• Always use the raincover when it is raining or snowing. If the strol
-
ler is wet before the raincover is to be used, try if possible to wipe it
first.
• Let the raincover dry completely before it is placed back in the bag.
• Loosen the wing nut (19) and tighten the adjuster knob (20), tighten
the wing nut again. Test the stroller to see if it runs straight. If it still
pulls to the right repeat the procedure.
Should the stroller pull to the left, or after the adjustment, you
can rectify this in the following two steps:
1.
Still on the right side (18) but reverse the steps of the above ad-
justment. Loosen the wing nut (19) and instead of tightening the
adjuster knob (20) you loosen it by unscrewing it in the opposite
direction of the arrow.
• Tighten the wing nut again.
2.
Repeat the procedure on the stroller’s left side (17) by loosening
the wing nut (19) and tightening the adjuster knob (20).
• Tighten the wing nut again.
IMPORTANT!
The wing nut must always be tightened after adjustment of the
adjuster knob.
Scooter S:
WARNING
• Never pull a pram with swivel front wheels behind you, if the front
wheels are not locked. The pram might self turn which can lead to a
safety risk if you are not cautious and attentive.