English
53
Manual Monkey v. 1.4
12
13
11
14
15
15
3
17
16
16
22
19
18
21
20
14
Adjusting the footrest
• The footrest can be adjusted into different positions. Adjust the
footrest to the down position by pushing in the release buttons (16)
on each side. Keep the release buttons pushed in and adjust (17)
into the desired position.
• To adjust into the horizontal position lift the footrest upwards.
• The stroller features an automatic adjustment of the footrest into
the horizontal position which is required for folding.
WARNING
• Do not let the child/children stand on the footrest.
Positioning of the shoulder straps
Moving from the lowest to the highest position.
• In order to move the shoulder straps to the highest position. Remove
the shoulder harness protection pads
• Open all the zippers to be able to access the backrest of the seat.
• Move the straps from the lower holes (18) to higher (19).
Moving from the highest to the lowest position.
• In order to move the shoulder straps from the highest to the lowest
position, follow the above steps in reverse order.
Positioning of the crotch strap
Moving from the inner to the outer position.
• In order to move the crotch strap from the inner to the outer hole,
open the zipper (20) ta access the bottom of the seat.
• Pull out the strap form the under side (21) and insert the strap in the
outer hole through the fabrics and the wooden seat plate (22).
• Close the zipper (20).
Moving from the outer to the inner position.
• In order to move the crotch strap from the outer to the inner hole, fol-
low the above steps in reverse order.
WARNING
• Before you use the pram, make sure that the seat fabrics are correctly
attached and that all 5 zippers are correctly fastened
Assembly and usage of seat unit
• To release the seat-unit: Start by engaging the parking device.
Press the handles (14) on both sides at the same time and then lift
the seat-unit straight up.
WARNING
• Don’t allow any child to be placed in the vehicle when it is being
folded/unfolded.
• Hold the handles steadily until the seat unit is in place.
IMPORTANT
• Make sure that the seat-unit is in place, before you start to use the
vehicle.
• Never lift the top part when it is assembled onto the chassis.
Adjusting the hood
• Adjust the hood by gently pulling the front backwards/forwards (15)
until it reaches the desired position.
• The pram is equipped with a sewn in mosquito net in the hood. The
mosquito net can be pulled over the footrest and attached with the
plastic hooks.
IMPORTANT!
• Never lift the stroller by holding on to the hood.
• Never lift the top part when it is assembled on the chassis.
