1.Introduction
The unit provides the mains voltage monitoring and automatic transfer switching. In the event of a
mains voltage failure, the remote start relay output is energized and the unit automatically
transfers the load from the mains to the generator. Both automatic and manual control is possible.
A test mode is also available which allows the generator to be run without taking the load.
The unit is extensively programmable through the front panel, with password protection on two
levels. Operational parameters can also be monitored and controlled from a PC via a built-in RS-
232 communication port.
The unit monitors generator operation and gives warning of any faults that are detected.
If a fault is detected, the unit shuts down the engine and shows the failure message on the LCD
display.
1.1 General Specifications
1.2 Warranty
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts from
the delivery date. This warranty is in force if duty and responsibilities which are determined in
warranty document and instruction manual performs by the customer completely.
1.3 Maintenance
Repairs should only be performed by trained and specialized personnel. Cut power to the device
before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in ethyl
alcohol or water to clean the external plastic case.
4
1.4 Order Information
Trans-MiniATS
:
Automatic Transfer Switch
Note:
Device have time clock. If real time clock is needed, “RTC” expression must be added to end of order code.
Example: Trans-MiniATS.RTC
