Programming Screen
If SET2/Enter button is
pressed, next parameter
is shown.
Press SET1
button to exit
from
programming
mode.
Programming Screen
Press SET1 button to exit
without saving parameter
value.
Press
SET2/Enter
button for
saving
parameter
value.
If SET2/Enter button is
pressed, next parameter
is shown.
Parameter can be
changed with increment
and decrement buttons.
Parameter value can be
observed by pressing
increment button.
Hysteresis-2 Value
Hysteresis-2 Parameter
Hysteresis-2
Value
In programming
screen, Press
SET1 button to exit
from programming
mode and turn to
the operation
screen.
35
If no operation is done in programming or Set value mode for 20 seconds, device
turns to main operation screen automatically.
i
Main Operation Screen
In programming screen,
Press SET1 button to exit
from programming mode and
turn to the main operation
screen.
