5. Failure Messages in ESM-1510 Temperature Controller
Probe defect in analogue inputs. Sensor connection is wrong or
there is no sensor connection.
SV
P
ESM-1510
SET
°C
Temperature Controller
27
6. Specifications
Device Type
: Temperature Controller
Housing&Mounting
: 86mm x 35mm x 59mm plastic housing for Rail Mounting.
Protection Class
: IP20.
Weight
: Approximately 0.14 Kg.
Environmental Ratings
:
Standard, indoor at an altitude of less than 2000 meters
with none condensing humidity.
o
o
o
o
Storage / Operating Temperature
: -40 C to +85 C / 0 C to +50 C
Storage / Operating Humidity
: 90 % max. (None condensing)
Installation
: DIN Rail Mounting
Overvoltage Category
: II.
Pollution Degree
:
II, office or workplace, none conductive pollution
Operating Conditions
:
Continuous
Supply Voltage and Power
:
230
V
V
(± 15%) 50/60 Hz. 1.5
VA
115
V
V
(± 15%) 50/60 Hz. 1.5
VA
24 V
V
(± 15%) 50/60 Hz. 1.5
VA
24
V
W
(- 15%, + 10%) 50/60 Hz. 1.5
VA
10...30
V
Z
1.5 W
Temperature Sensor Inputs
: NTC, PTC, TC, RTD
NTC Input Type
: NTC (10 k
W
@.25 °C )
PTC Input Type
: PTC (1000
W
@.25 °C )
Thermocouple Input Types
: J, K (IEC584.1)(ITS90)
Thermoresistance Input Type
: PT-100, PT-1000 (IEC751)(ITS90)
Accuracy
: ±1% of full scale for thermocouple and thermoresistance
Cold Junction Compensation
: Automatically ± 0.1°C/1°C.
Sensor Break Protection
: Upscale
Sampling Cycle
: 3 samples per second
Control Form
: ON / OFF
Relay Output
: Resistive Load 5 A@250 V
V
(Electrical Life : 100.000 operation (Full Load)
Optional SSR Output
: Maximum 28 mA, Maximum 15 V
Z
Display
: 9 mm Red 3 digits LED Display
Leds
: SV (Green) , OUT (Red) , P(Red) 3 mm
Approvals
: ,