Emjoi PediSmooth AP3RP, Instruction Booklet, Page: 9 / 12

2. After the PediSmooth roller pops out,
remove it from the cylinder holding the
end cap of the PediSmooth roller
(fig. 4).
3. Remove the replacement PediSmooth
roller from the replacement container
(fig. 5) by pressing the bottom with your
pointer finger and catching it in the palm
of your opposite hand.
4. Place the replacement PediSmooth roller
into the unit until you hear a ‘click’ sound.
Be sure to insert the new PediSmooth roller
into the unit with the thinner side going
into the unit (fig. 6 & 7)
5. After placing a new PediSmooth roller
into the unit check that it has been firmly
installed with no signs of shaky or loose
parts.
For purchasing additional rollers, please contact
the Sunbeam help line on 1300 881 861.
Figure 5
Figure 6
Figure 7