background image

P. 5

5

4

4.  To turn On your unit, press the safety switch lock and at the same time 

slide it up to the desired speed. 

 

0 Power "OFF"

 

1 Low speed

 

2 High speed

5.  Turn on the unit (fig. 4) and gently rotate (back and 

forth or side to side) over the callous/corn/hard skin 

area for 

2-3

 seconds. 

Do not press hard - gently 

glide  the  unit  over  desired  area.

   The  unit  will 

stop if it is pressed too hard on the skin.  Turn the 

unit off and check if you achieved the softness you 

desire.  If not, turn on the unit and go over the area 

for 

2-3

 seconds more and check again.  Continue to 

use  this  method  until  the  level  of  smoothness  is 

obtained.  

 

Warning:  Stop  using  if  skin  becomes  sore  or 

inflamed.

  Warning: Do not use on skin for more than 2-3 

seconds at a time.

6.  Turn the unit off (fig. 5). 

7.  Rinse the skin or use a wet towel to get rid of the 

excess dead particles.

8.  To clean the 

Emjoi®Micro-Pedi Pro Tornado

, please see 

the Cleaning section.

9.  Keep the protective cover on your unit when it is not 

in use.

Summary of Contents for MICRO-PEDI PRO TORNADO













Reviews:

Related manuals for MICRO-PEDI PRO TORNADO