5
OPERATION
1.
Select a station
A Tuning in
Click
BAND
key for band selecting. Click
UP
or
DOWN
key for
tuning step by step (FM: 50kHz/step AM: 9kHz/step). If keeping
UP
or
DOWN
pressed
down for 1 second, it will search continuously until a station tuned in or don’t in 30
seconds.
B Calling out
Click
BAND
key for band selecting. Click one key of M1 to +10
for calling out a station which stored in M1
to
M10. Press down
M+10
key for 1 second
with CH1_ appears on the VFD screen, and then click one of M1
to
M9 for calling out the
station stored in M11
to
M19. Press down
M+10
key for 2 seconds for calling out the
station stored in M20.
2.
Save a station
A Save with auto search
Click
BAND
key for band selecting. Click
AUTO
key
with the symbol “AUTO” flashing on the VFD screen, and then click
UP
or
DOWN
key
for starting to search station from the lowest frequency to the highest frequency of the band
or in reverse order. The stations received will be saved into the memories from M1 to M20
until searching to the end of the band or all memories filled up. The station stored in M1
will be called out when AUTO SEARCH comes to the end.
B Save manually
Click
MEMO
key with the symbols “MEN” and “CH_ _”
flashing on the VFD screen. Click one key of M1
to
M+10 as the way mentioned in section
1·B for memory selection and then click
MEMO
key once again to save the station
received at present into the memory selected. The screen will resume to receiving mode
when done.
3.
Mono/Stereo switching
Click
MONO
key in circle for switching between Stereo Mode and Mono Mode of
the receiver. Stereo Mode is for FM only. The stereo function will be activated
automatically with the symbol “STEREO” flashing in Stereo Mode while the FM stereo
signal is strong enough. But the S/N of Mono Mode is better than that of Stereo Mode.
