TB-6608
Page 1 of 5
© 2021 DESCO INDUSTRIES INC
Employee Owned
DESCO EUROPE
- 2A DUNHAMS LANE, LETCHWORTH, HERTFORDSHIRE, SG6 1BE, UK
Phone: +44 (0) 1462 672005 • E-mail:
SmartLog Pro® SE with Turnstile
Installation, Operation and Maintenance
Description
The EMIT
verifies the functionality of an
operator’s wrist strap and footwear, logs the test results,
and controls access to an ESD Protected Area. The
turnstile unlocks after the operator’s wrist strap and/or
footwear is determined to act as a path-to-ground. All
operator test activity is logged into a database to meet
the EN 61340-5-1 Compliance Verification and record
keeping requirements. Each log entry includes operator
identification, test results, resistance measurements,
time, temperature and humidity.
See
for more information on the EMIT
SmartLog Pro® SE.
The
EDS EDSUKTHH28 Half Height Turnstile
is a
bidirectional tripod swing turnstile. Both its cabinet and
tripod rotors are composed of stainless steel. LED
passage signs are located at both the entry and exit
sides. A flashing green arrow indicates when to pass,
and a red X indicates when the turnstile is closed.
The turnstile is configured to Fail-Safe Loss-of-Power
Operation. Should loss of power occur, the turnstile’s
arms will unlock and rotate freely in both directions to
allow operators to pass through.
The EMIT 50175 SmartLog Pro® SE with Turnstile has
an input voltage rating of 220 VAC.
June 2021
Figure 1. EMIT 50175 SmartLog Pro® SE with Turnstile
SmartLog Pro® Manager automates the collection of
ESD personnel grounding tests and maintains records
for a Compliance Verification Plan as required by ANSI/
ESD S20.20. It includes functions for tracking employee
leave time, shift and department assignments, and
ESD training accreditation. SmartLog Pro® Manager
generates automated reports that may be e-mailed to
track short term and long term corrective actions. Test
limits and test parameters (wrist strap only, footwear
only, wrist strap and footwear, etc.) may be customized
with the web app to meet special requirements.
SmartLog Pro® Manager is only compatible with
the SmartLog Pro® SE, and it is required for every
SmartLog Pro® SE system installation. Contact Desco
Europe Customer Service to schedule an installation
session.
See technical bulletin
ESD Association Information
For more information on ESD Control Plan
requirements, please visit the ESD Association website
at
.
Packaging
1 SmartLog Pro® SE with Turnstile
1 Wall Mounting Bracket
1 Dual Independent Foot Plate
1 Allen Wrench, 5/32"
4 M10 x 85 Steel Anchors
4 M10 x 20 Inbus Bolts
4 M10 Washers
2 Turnstile Keys
1 Certificate of Calibration
Made in the
United States of America and Britain
SmartLog Pro® Manager Web App
