EMIT STARTDISPLAY ESD2
ESD2 is a digital start display suitable for orienteering, cross country,
biathlon, cycling and other sports with interval starts. The display has two
lines by six digits. The actual time appears on the top line, while startno.
and countdown to next start, are shown on the bottom line. Countdown of
the last five seconds is also indicated with a loud and clear beep. ESD2 can
be programmed with the built-in keyboard or from a PC.
The display is based on modern LED technology, and is easy to read, even
in direct sunlight. The brightness of the digits is regulated automatically by
the built-in sensor. In bright sunlight ESD2 will automatically increase the
brightness, while in less light the brightness is decreased to save battery
power.
ESD2 comes with the following equipment included:
•
Tripod
•
Power Cable 220 V
•
USB cable
•
This manual
ESD2 is designed to be used outdoors in "all-kinds-weather", but it is not 100%
waterproof. Make sure no water comes into the connection ports on the bottom /
lower side of the display. Application for ESD2 is from -20 to 40 degrees C, but
the battery capacity is weakened when it is very cold.
Connections
•
Power connector
•
USB port for connection to PC
•
2 «bananaplug» ports for synchronizing multiple ESD2, or connection to a
starting gate, photocell, push button, etc.
•
1 'Loop' output for eLine loop –
Only on ESD2 Finish Display.
