TB-6586
Page 1 of 3
© 2014 DESCO INDUSTRIES, INC.
Employee Owned
EMIT
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website:
DescoEMIT.com
ESD Glove Test Fixture
Installation, Operation and Maintenance
Description
The EMIT ESD Glove Test Fixture is designed to be
used with the SmartLog V5
™
and Combo Tester X3 to
test operators that wear ESD gloves or finger cots per
Compliance Verification required by ESD TR53. The Test
Fixture is made with a stainless steel electrode that creates
a larger test surface area allowing the path-to-ground of the
operator wearing gloves or finger cots to be measured. An
infrared sensor activates the ESD Glove Test Fixture when
the operator grips the electrode and overrides the test switch
on the personnel tester.
ESD Control Programs which include measures to prevent
Charge Device Model (CDM) ESD damage will often require
the use of finger cots or Static Dissipative Gloves. Operators
handling ESD sensitive items wearing gloves or finger cots
should be tested using a wrist strap or footwear tester while
wearing the gloves or finger cots. The test is in accordance
with Compliance Verification ESD TR53.
January 2014
Figure 1. EMIT 50755 ESD Glove Test Fixture
TECHNICAL BULLETIN TB-6586
Brand
Item
Description
EMIT
50766
SmartLog V5
™
, North America
EMIT
50767
SmartLog V5
™
, Asia
EMIT
50768 SmartLog V5
™
, Europe
EMIT
50769
SmartLog V5
™,
Europe, with 10mm
Adapter
Desco 19278 Combo Tester X3, North America
Desco
19279
Combo Tester X3 with Stand, North
America
The EMIT 50755 ESD Glove Test Fixture is to be used with
the following items:
NOTE: The 50755 ESD Glove Test Fixture is also compatible
with the following discontinued EMIT items:
50760, 50761, 50762, 50763
Packaging
1
ESD Glove Test Fixture
1 Communication Cable
2 Mounting Screws
Made in the
United States of America
