Eminent EM4585 Manual Download Page 20 | Manualshive

Page: 20 / 26

Eminent EM4585 Manual Download Page 20

20

|

ENGLISH

7.

Click 'Advanced Setup'.

8.

Click 'Wireless'.

9.

Click 'Wireless Setup'.

10.

Fill out a SSID: If you want your current wireless network to be extended using
the same network name (SSID), you need to fill out the SSID as used on your
first wireless router. Also, the channel needs to be the same.

11.

Set a security at 'Authentication'. If you want your current wireless network to be
extended using the same network name (SSID), you can set the same security
as used on your first wireless router.

12.

Click 'Apply' to save the settings.

13.

Then click 'Save' at the top of the screen.

6.3 Configuring the Wireless Multi Bridge settings

1.

Click 'Wireless'.

2.

Click 'Wireless Multi Bridge'.

3.

Set 'Operation' to 'Start'.

4.

Make sure 'Wireless Bridge' is selected.

5.

Click the 'Search AP' button.

6.

Select the network name (SSID) you want to connect to (First wireless router).

7.

If the network is secured, you need to fill out the security key.

8.

Click 'Apply.

9.

Then click 'Save' at the top of the screen.

10.

Click 'Network'.

11.

If your first wireless router has another LAN IP-Address (range), you can change
the IP-Address of the Eminent router at 'LAN IP'.

12.

Click 'Apply and restart'. Close your web browser en restart your computer or
disable the network card and then enable the LAN card again.

13.

Log in to the Eminent router using the new IP-Address.

14.

Click 'Setup Tool'.

15.

Click 'Advanced Setup'.

16.

Click 'Network'.

17.

Click 'LAN/DHCP Server'.

18.

Set 'DHCP Server' to 'Stop'.

19.

Click 'Apply'.

20.

Click 'Save' at the top of the screen.

21.

Your Eminent router has now been set using Wireless Multi Bridge.

Hint: If you have set another LAN IP-Address as described in step 11, this IP-Address
needs to be in the same range as the first router. For Example: If your first modem or
router is accessible on IP-Address ‘192.168.1.1’, you need to make sure the Eminent
router is set to this IP-range. You can set the Eminent router to ‘192.168.1.200’. From
that moment on, the Eminent router is accessible using this new IP-Address.

«
...
18
19
20
21
22
...
»

Summary of Contents for EM4585



























Reviews:

No comments