9
|
ENGLISH
Key:
_____________________________________________________
4.0 Manual configuration as an Access Point
Install the GigaLINK 300N as an access point if you have a router or DSL modem
router. Make sure that your Internet browser and your network are well configured
when configuring manually. You can assume that the settings are correct, unless you
have changed any of the settings in the past.
Example of GigaLINK 300N as an Access Point
4.1 Connecting the GigaLINK 300N
1.
Turn off the computer.
2.
Connect the GigaLINK 300N to a wall outlet using the supplied power adapter.
3.
Connect the supplied UTP network cable to the ‘LAN 4’ port of the GigaLINK
300N.
4.
Connect the other end of this UTP network cable to the network adapter of your
computer.
Is my GigaLINK 300N correctly connected to the wall outlet? You can check this by
verifying that the POWER LED is on.
Do I have a proper network connection? Turn on the computer and verify if the LED on
the GigaLINK 300N, corresponding with the LAN-port to which you connected the UTP
networking cable, is lit. The LED on the network adapter of your computer should also
be lit..