32
|
ENGLISH
The following table describes the parameters and buttons of this page.
Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to
the destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the
Static
Route Table
.
Update
Select a row in the
Static Route Table
and modify
the parameters. Then click it to save the settings
temporarily.
Delete Selected
Select a row in the
Static Route Table
and click it to
delete the row.
Show Routes
Click it, the
IP Route Table
appears. You can view a
list of destination routes commonly accessed by your
network.
Static Route Table
A list of the previously configured static IP routes.
Click
Show Routes
, the page shown in the following figure appears. The table shows
a list of destination routes commonly accessed by your network.
Summary of Contents for EM4561 / EM4567
