17
|
ENGLISH
22.
Click ‘Finish’ when the 5GHz settings are complete.
23.
The wizard will now save the settings and will close the screen automatically.
*** The connection is lost when WPA2 AES has been enabled in the router and not yet
in the wireless network adapter. When WPA2 AES has also been enabled in the
wireless network adapter, the connection will be repaired.
Write down the network name, the key and the channel:
WPA2 AES
Network name:
____________________________________________________
Key:
____________________________________________________
Channel: ____________________________________________________
5.3 Configuring the signal booster (2)
1.
Turn on your computer.
2.
Open your internet browser (e.g. Internet Explorer or Firefox).
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the ‘Enter key’ or click ‘Go to’.
5.
Click ‘Setup Tool’.
6.
You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
7.
Click ‘Advanced Setup’ in the left menu.
8.
Click ‘Network’ in the left menu.
9.
Click ‘LAN/DHCP Server’.
10.
Select ‘Stop’ at ‘DHCP Server’.
11.
Click ‘Apply’ at the right side in the menu ‘DHCP Server’.
12.
Type ‘192.168.8.200’ in the ‘LAN IP address’ field.
13.
Type ‘255.255.255.0’ in the ‘Subnet mask’ field.
14.
Click the button ‘Apply & Restart’.
Note! If you wish to log in to your router at a later point in time, you must assign a fixed
IP address to your computer.
1.
Click ‘Start’.
2.
Click ‘Control Panel’.
3.
Double click ‘Network Connections’.
4.
Right click the appropriate ’LAN Connection’.
5.
Click ‘Properties’.
6.
Select ‘Internet-protocol (TCP/IP)’.
7.
Click ‘Properties’.
8.
Select ‘Use the following IP Address’.
9.
Enter ‘192.168.8.25’ in the ‘IP Address’ field.