1.If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agentor similarly qualified persons in order to
avoid a hazard.
2.Indoor use only
3.Power line connection
：
The power cord should
be connected in compliance with the relevant
standard, to an 3×20A omni-polar circuit
breaker.
4.If the appliance is being connected directly to
the mains an Omni-polar circuit-breaker must
be installed with a minimum opening of 3mm
between contacts.
5.Please use a dedicated power protection air
switch;
6.Never directly wash the hotplate
7.Never have the hotplate to work
performance may be affected and danger may
happen.
Safety Warnings
2
with water
so as to avoid dangers.
without
food inside, otherwise its operational
Summary of Contents for EMCER64
Page 1: ...Instruction Manual Installation Manual MODEL EMCER64...
Page 20: ...20...
