EMH metering DIZ, Instructions For Use Manual

Page: 4 / 48

4
Components Waste collection and disposal
Battery Take safety precautions against short circuits before
disposing of the batteries. Dispose of the batteries
in their original packaging or insulate the terminals.
Do not dispose of batteries with the domestic waste.
Instead, observe the locally applicable waste and
environmental protection standards.
Basic safety instructions
y
Read all the enclosed instructions and information.
y
Observe the warnings on the device and in the documents.
y
Always be aware of safety issues and hazards when working on the
device.
y
The customary local occupational health and safety regulations for
electrical installations must be observed during assembly, installation
and removal of the device.
y
Make sure that the installation and operating location of the device
meets the specifications in the technical data.
y
Before assembly, check the devices for any transport damage and
other externally visible damage.
y
Only use the device if it is in a technically flawless state, and solely
in line with its intended use.
y
The connection cables used to connect a meter must be selected
for type, cross section, voltage and temperature. In the process,
the maximum load on the meter and the installation environment
must be considered.
y
Attach ferrules to flexible wires.
y
Observe the maintenance and warranty instructions.
y
If the mains power fails and then returns, there is no need to do
anything to the meter.