0.025
LOG FREQ (kHz)
10
Dimensions:
.800
1.050
SPECIFICATIONS
Input Impedance (Ohms)
250K
Input Referred Noise
-130dbV
Output Impedance (Ohms)
2K
Current @ 9V (Microamps)
750
Battery Life (Hours)
200
Maximum Supply (Volts DC)
18
INSTALLATION INFORMATION
EMG MODEL:
EXB
(ACTIVE/PASSIVE PICKUP INPUTS)
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
© 2014 Copyright EMG INC. All Rights Reserved.
PO BOX 4394
SANTA ROSA, CA
95402 USA
P (707) 525-9941
F (707) 575-7046
EMGPICKUPS.COM
0230-0165rC
Frequency Response:
EMG-EXB
1.325
.400
.309 (8mm P .75)
GENERAL OPERATION:
The EXB is an active EQ circuit for bass guitar that simultaneously increases both low and high frequencies while decreasing mid-range.
The graph below illustrates the effect of the EXB. The thick black line displays the effect with the control all the way up (clockwise).
The flat black line illustrates the effect with the control all the way down (counter-clockwise) in the bypass mode. The EXB is continuously
variable from flat to maximum effect. The EXB is wired in series with the signal path, so there is an input and output.
The EXB has buffered inputs and can be used with passive pickups.
Connector for EMG Active Tone controls
and accessories.
Pin 1
Input
Pin 2
Ground for Input
Pin 3
Ground for Output
Pin 4
Output
Pin 5
V+ Supply
1 2 3 4 5
INCLUDED:
1 EXB Control
1 Battery Clip with Buss Connector
1 Stereo Output Jack (Battery Switching)
2 Interconnect cables
10 dB/div
1
2
3
4
5
EXB
