EMG CY26ABi, Instruction Manual

Page: 16 / 28

16
HOW TO RECHARGE THE
BATTERY
In a ventilated area, insert the charger connector into the corresponding battery
charging connector, then
the charger into a standard cur-
rent plug a 230V
~
50Hz.
Do not recharge the battery in
closed and poorly ventilated
places!
Verify that the charger connec-
tor and plug are not damaged.
During charging, the charger
indicator is red; when the bat-
tery is full, the indicator turns
green. The time needed for a
full charge is approximately 6
hours. This may vary conside-
ring the residual charge.
After charging is completed, pull out the charger plug from the socket, then di-
sconnect the charger connector from the bicycle charging hole. Do not leave the
charger connected to the socket for a long time after charging has been completed.
If a smell comes out from the charger during charging, the temperature may have
become too high; please stop charging immediately and send the unit for mainte-
nance.
Use only the charger supplied with the bicycle to avoid damage to the battery and
not to void the warranty.
lithium battery, do not replace with incorrect battery type,
danger of explosion.
WARNING