background image

VOLUME

B122rH

VOLUME

B122rH

VOLUME

B122rH

VOLUME

B122rH

TONE

B124rH

NECK PICKUP

BRIDGE PICKUP

BATTERY

NEG (-)

RED

RED

RED

GROUND

BRIDGE P/U

NECK P/U

OUTPUT

-  9V  +

NK VOLUME

BR VOLUME

T

R

S

OUTPUT CABLE

NECK PICKUP

BRIDGE PICKUP

BATTERY

NEG (-)

RED

RED

RED

GROUND

BRIDGE P/U

NECK P/U

OUTPUT

-  9V  +

NK VOLUME

BR VOLUME

T

R

S

OUTPUT CABLE

MASTER
  TONE

2 Pickup Guitars using a selection switch:

Diagrams #4 and #5 show the pickups connected to the B157 Pickup Buss.

To learn more about the B157 Pickup Buss, be sure to go to the EMG Website:

http://www.emgpickups.com. More diagrams are available at the EMG website. 

The AB or any EMG Active Tone Control can follow the pickup buss

and then to the output jack.  

AB (Afterburner) Page 3

Diagram #4

2 Pickups

Toggle Style Switch

Volume each Pickup (Volumes are independent)

AB Control 

  

 

Diagram #5

2 Pickups

Toggle Style Switch

Volume each Pickup (Volumes are independent)

Master Tone (Passive)

AB Control

 

  

 

NOTE:
REVERSED 
CONNECTOR

AB

NOTE:
REVERSED 
CONNECTOR

AB

Summary of Contents for AB

Page 1: ...th the EMG AB The AB is designed to be placed last in the signal chain just before the output jack Also the AB will convert a guitar with passive High Impedance pickups to a low impedance output A few notes about boosting The amount of clean boost you can get from the AB is dependent upon the amount of gain you set on the pot and the level of power supply you have The usual supply is 9 Volts If yo...

Page 2: ...cessory controls can be substituted for one another since they all have buffered inputs and utilize the same 5 pin connnector So if you decide you would like to use an EXG rather than the AB simply unplug the AB and replace it with the EXG Installation Instructions EMG Model AB Afterburner AB Afterburner Page 2 Note Reversed connector Pins 1 and 2 are reversed Make sure the connectors are plugged ...

Page 3: ...s 4 and 5 show the pickups connected to the B157 Pickup Buss To learn more about the B157 Pickup Buss be sure to go to the EMG Website http www emgpickups com More diagrams are available at the EMG website The AB or any EMG Active Tone Control can follow the pickup buss and then to the output jack AB Afterburner Page 3 Diagram 4 2 Pickups Toggle Style Switch Volume each Pickup Volumes are independ...

Page 4: ...x cable from the output of the VLPF to the input of the AB Control 4 Plug the output cable from the AB Control to the output jack 5 Plug the Red wire from the AB to one of the supply pins on the B161 Switch Buss Be sure the 3 shunts are installed on the bypass header of the B161 switch or you won t get any output from the guitar Refer to Diagram 8 Volume SPC Bridge Pickup only AB Control Diagram 8...

Reviews: