6
7
20 cm
Placing the EMFIT QS in double bed
If you sleep with a partner in a double bed,
place the sensor on to your side of the bed as
far as possible from your partner. Make sure
the sensor is still under your chest area.
You can bend the sensor over the corner of
your mattress. It will help to prevent sensing
your partner’s heart rate, especially when you
leave the bed earlier than he/she.
The device works most reliably when the
sensor is located directly below your heart.
Emfit QS supports 2.4 GHz Wi-Fi.
Wi-Fi channels 1 - 11 are supported.
If you do not know is your home Wi-Fi compatible,
go to Main Manual; chapter 13 or just try your luck.
Notice these before attempting
to connect to Wi-Fi
If your router has a WPS button (Wireless Protected Setup) see the Main Manual page 13.
The 5 GHz Wi-Fi is not supported.
Wi-Fi channels 12 , 13 and 14 are not supported. This concerns European customers especially.
