manualshive.com logo in svg

Emerson USB Fieldbus Interface, User Manual, Page: 16 / 59

Share
Download
Emerson USB Fieldbus Interface User Manual Download Page 16

4

Fieldbus Interface Configuration utility

Topics covered in this chapter:

•

Launch the Fieldbus Interface Configuration utility

•

Power fieldbus devices

•

Commission fieldbus devices

•

Decommission fieldbus devices

•

Change the device class

•

Start or stop the USB FF HSE Server manually

4.1

Launch the Fieldbus Interface Configuration utility

•

Click 

Start

 > 

All Programs

 > 

Emerson Process Management

 > 

USB Fieldbus Interface

> 

USB Fieldbus Interface

.

or

•

Double-click the USB Fieldbus Interface desktop shortcut.

This is only available when you have selected the desktop icon option
during software installation.

Note

If no fieldbus device is detected after 30 seconds, this dialog is displayed. Click 

OK

 to continue.

No device detected dialog

Figure 4-1:   

A connected fieldbus device or segment has to be powered by an external
power source or be provided power by the Fieldbus Interface Configuration
utility for it to be detected. For more information, see 

Section 7.2

.

User's Manual

May 2014

16

Summary of Contents for USB Fieldbus Interface




























































Reviews:

No comments