Page: 16
9 0 Technical Specifications
Catalog Number
SSW700
SSW1000
SSW1500
Topology
Line Interactive sinewave
Capacity (VA/W)
700/480
1000/750
1440/1200
Dimensions
Unit (H x W x D) - in (mm)
9.09 x 6.69 x 12.4
(231 x 170 x 315)
9.09 x 6.69 x 12.4
(231 x 170 x 315)
9.09 x 6.69 x 16.97
(231 x 170 x 431)
Ship Weight - lbs (kg)
28.44 (12.9) ± 10%
32.41 (14.7) ± 10%
50.71 (23.0) ± 10%
Input Parameters
Voltage
120 Vac -23%/+29%
Frequency
50/60 Hz +/-10% (auto sensing)
Input Power Cord
5 ft. with NEMA 5-15P
Output AC Parameters
Voltage (Battery Mode)
120V±10%
Frequency (On Battery)
50/60 Hz
Auto Voltage Regulation
(AVR function under
Normal Mode)
V
out
= Input 102VAC x 118% at Boost mode
V
out
= Input 138VAC x 85% at Buck mode
Overload Protection
Line Mode:
1. 110%±5% load for 5 minutes. After 5 minutes at 110%±5%, power will not be provided to the load.
Then, every 10 minutes, auto recovery will be attempted.
2. 120%±5% load for 10 seconds. After 10 seconds at 120%±5%, power will not be provided to the load.
Then, every 10 minutes, auto recovery will be attempted.
3. 130%±5% load for 1.5 seconds. After 1.5 seconds at 130%±5%, power will not be provided to the
load. Then, every 10 minutes, auto recovery will be attempted.
Short Circuit
1. The output current continues over 125% within 60ms to OSCP* and then goes to Battery Mode.
2. UPS goes to retry mode every 10 seconds until Battery Voltage (V
B
) <11V/cell.
3. The battery recharges when the V
B
> 12.7V/cell, then UPS continues retry mode every 10 seconds.
4. UPS goes into auto recovery mode until the short circuit disappears then goes back to Line Mode.
Battery Parameters
Battery Type
VRLA, maintenance free,sealed, lead-acid cells
Transfer Time
Typical: 8ms, Max<10ms@AC mode to backup mode
Typical Recharge Time
8 hours
Environmental
Operating Temperature
0°C to +40°C
Storage Temperature
-15°C to +50°C
Relative Humidity
0% to 90% relative humidity, non-condensing
Audible Noise
Models SSW700 and SSW1000: ≤40dBA without audible alarm beyond 1m at rated load
Model SSW1500: ≤45dBA without audible alarm beyond 1m at rated load
Standards
Certifications
cULus Listed, UPS Equipment UL 1778, CSA C22.2 No. 107.3
EMC
FCC Part 15, Subpart B, Class A; EN62040-2; EN55032; CISPR22
Surge Protection
Meets IEEE C62.41, Category A & B
L-L:1kV; L-E: 2kV
NOTE: 1200W at 0 75 power factor equals 1600 VA Line cord limits total load to 1440 VA (max )
