Emerson SmartSet CKD9917 Owner'S Manual Download Page 17

Page: 17 / 24

Alarm Operation

Setting the ALARM Time (Wake Up time)

This clock radio has two separate wake-up

alarms that can be set and used independently.

To set or adjust the wake-up times please proceed as follows:

Check the Alarm Time

: During CD playing or radio listening, press

ALARM

1/ ALARM2

buttons to show alarm time in display.

Alarm time setting: Press the

POWER

button to off mode, hold the

ALARM 1/

ALARM2

buttons and then press either the

buttons to adjust alarm time

forward and backward as desired. Each press of the

buttons will

change the display time by one minute. If you hold the

buttons the

display time will change slowly at the first, but if you continue holding the

buttons the display digit will change rapidly.

NOTE: If Alarm 1 and Alarm 2 are set in same alarm time, only Alarm 1 will

sound.

Activate or Deactivate the Wake-up Mode

After you have adjusted the wake-up times on one or both alarms, you must

activate the alarms and select the wake-up mode. You have the option of waking

to the buzzer, radio or CD.

Setting the Wake Up Mode:

Press the

POWER

button to off mode, hold the

ALARM 1/ ALARM2

buttons and press the

ALARM SET / DISPLAY

button to

select the wake-up mode. Once the wake up mode is activated the AL1 or

AL2 indicator will light on the display.

Wake to Radio

: Select a radio station and make sure the volume is set as

desired. Press the

POWER

button to off mode, hold the

ALARM 1/ ALARM2

buttons and press the

ALARM SET / DISPLAY

button until the AL1 or AL2

indicator turns red.

Wake to CD

: Place a CD in the CD compartment and make sure the volume

is set as desired. Press the

POWER

button to off mode, hold the

ALARM 1/

ALARM2

buttons and press the

ALARM SET / DISPLAY

button until the

AL1 or AL2 indicator turns green.

NOTE: If there is no CD inserted, or the CD is damaged, it will automatically

wake to Buzzer.

AL2

MON TUE WED THU FRI SAT SUN

AL1

SAT

Wake to Buzzer

: Press the

POWER

button to off mode, hold the

ALARM 1/

ALARM2

buttons and press the

ALARM SET / DISPLAY

button until the

AL1 or AL2 indicator turns amber.

Summary of Contents for SmartSet CKD9917

























Search results

Summary of Contents for SmartSet CKD9917

Reviews:

Related manuals for SmartSet CKD9917

Brands by name

Popular brands

Emerson SmartSet CKD9917, Owner'S Manual

Search results

Summary of Contents for SmartSet CKD9917

Reviews:

Related manuals for SmartSet CKD9917

Brands by name

Popular brands