Installation Instructions
SH/Install/2016-09 Rev. 1
September 2016
9
Section 3: Step by Step Installation on Valve
Step by Step Installation on Valve
Figure 11
Fastening the Bracket using Head Cap Screws
Socket Head Cap Screws
Banana Washers
Adjusting Screw, one on each
side (not shown)
3/8” Diameter Hex Head
Screws
3.
Fasten the bracket to the valve using the 3/8" diameter hex head cap screws, lock
washers and hex nuts supplied. It may be necessary to loosen the socket head
cap screws retaining the banana washers and turn the bracket using the adjusting
screws to line up the bolt holes.
If unable to achieve alignment, the adapter will have to be turned one tooth in the
required direction, see Step 4.
Summary of Contents for SH Series
Page 1: ...Installation Instructions SH Install 2016 09 Rev 1 September 2016 Shafer SH Series ...
Page 2: ......
Page 16: ......
