RXi2-LP IPC Hardware Reference Manual
Section 2
GFK-3068B
Aug 2021
Hardware
7
Figure 3: Rear Panel Arrangement
Connecting Input Power (24V DC-in)
To connect to power, follow these steps:
1.
Verify that the power cable is not energized.
2.
Loosen the screw clamps on the mating power
connector.
3.
Strip the insulation from the power cables.
4.
Secure the power cable to the mating connector,
noting polarity, and tighten the screw clamps. Th e
torque for the attaching screws is 0.3 Nm (2.26 in-lb).
5.
Apply dc power to the unit. During normal startup and operation, the LED status
indicator displays as follows:
•
Solid amber while the RXi - Industrial Display unit is starting up
•
Solid green during normal operation
6.
Once power is applied, the unit begins initializing. The first thing to display is the
splash screen.
Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the range may
fail to boot the system or cause damage to the system board.
