Emerson Rosemount 5900C, Reference Manual

Page: 48 / 322

Extension pipe for minimum distance
The Rosemount 5900C Radar Level Gauge should be placed such that there is a minimum
gap of 1200 mm (47 in.) between the flange and the maximum product level (see
Still-
pipe and Verification Pin ). If necessary, an extension pipe can be used to raise the level
gauge. This will allow measurements closer to the top of the tank than would otherwise be
possible, as illustrated in
Figure 3-19 .
Figure 3-19: Rosemount 5900C with Extension Pipe
B
A
A. Extension pipe
B. Minimum 1200 mm (47 in.) to product surface
Installation Reference Manual
September 2019 00809-0100-5901
48 Reference Manual