39
Reference Manual
00809-0100-4570, Rev DA
Configuration - Rosemount 5708V and 5708S
November 2017
Configuration - Rosemount 5708V and 5708S
Section 6
Configuration -
Rosemount 5708V and 5708S
On-board configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 39
Setting the polling address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 40
6.1
On-board configuration
For the Rosemount
™
5708V and 5708S only polling address configuration is done using the LCD display
of the device.
The rest of the configuration is completed with the Rosemount 3DVision software. For further
information, see
Figure 6-1. User Interface
1. Connect power to the Rosemount 5708 and open the front cover.
A self-test will start and run for about 30 seconds. The display
remains blank during this time.
Navigates back within a function menu.
Continuous 3 second press exits to the default screen.
Navigates upwards in the navigation list.
Navigates right within a function.
Navigates downwards in the navigation list.
Navigates left within a function.
Navigates to the right when within a function group.
Stores a value once configured.
ESC
E
Summary of Contents for Rosemount 5708
