75
MODEL 5081-T
SECTION 10.0
DIAGNOSIS AND TROUBLESHOOTING
SECTION 10.0
DIAGNOSIS AND TROUBLESHOOTING
10.1 OVERVIEW
The Model 5081-T transmitters automatically monitor for fault
conditions. The Diagnose Menu allows the current variable set-
tings to be reviewed and shows fault messages indicating prob-
lems detected. Figure 10-1 illustrates the relationship between
the Diagnose Menu and its sub-menus. The mnemonics are
defined in Table 10-1.
10.1.1 TROUBLESHOOTING
Step 1
Look for a diagnostic fault message on the display to
help pinpoint the problem. Refer to Table 10-2 for an
explanation of the message and a list of the possible
problems that triggered it.
Step 2
Refer to the Quick Troubleshooting Guide, Table 10-3,
for common loop problems and the recommended
actions to resolve them.
Step 3
Follow the step-by-step troubleshooting flow chart,
offered in Figure 10-5, to diagnose less common or
more complex problems.
10.1.2 DISPLAYING DIAGNOSTIC VALUES
The DIAG key on the IRC is used to access the Diagnosis Menu.
The menu flow is shown in Figure 10-1 and the mnemonics are
defined in Table 10-1.
The
FAuLtS
sub-menu can be entered to show the last three
faults/warnings. The most recent is displayed first; NEXT scrolls
through the remaining faults. Pressing EXIT clears all fault/warn-
ings and returns the
FAuLtS
segment. Disconnecting the trans-
mitter removes all fault messages from memory. The
nonE
mes-
sage is displayed when no faults/warnings have occurred.
CURRENT OPERATING MENU
KEYPRESS COMMANDS
Menu Segment /
Prompt Area
Calibrate Menu
Segments/Commands
Program Menu
Segments/Commands
DIAGNOSE MENU
Segments/Commands
-E<!
EXIT
NEXT
ENTER
FIGURE 10-1. Diagnose Menu Segments
U<[9:1!!!!!
EXIT
NEXT
ENTER
'"*#\U\4U!!!!!
EXIT
NEXT
ENTER
G5<:[-A
EXIT
NEXT
ENTER
U17:
EXIT
NEXT
ENTER
9VU:VU
EXIT
NEXT
ENTER
OUS!/D[
EXIT
NEXT
ENTER
9VURVU!/DN
EXIT
NEXT
ENTER
4DSU
EXIT
NEXT
ENTER
THUVR!/VTU
EXIT
NEXT
ENTER
GHIDVNU
EXIT
NEXT
ENTER
U17:!<[9:1
EXIT
NEXT
ENTER
IDVNUT
EXIT
NEXT
ENTER
KDSG
EXIT
NEXT
ENTER
TQIU
EXIT
NEXT
ENTER
<1P<9S
9
EXIT
NEXT
ENTER
"!DLS
EXIT
NEXT
ENTER
/1[[!!/9P<U
EXIT
NEXT
ENTER
/-[5ES-U1
EXIT
NEXT
ENTER
/1[[!/9P<U
EXIT
NEXT
ENTER
U17:!-G6
EXIT
NEXT
ENTER
Calibrat
e
Program
Diagnose
5G!!!!!!!!!!!!!!!!"""
Exit
Enter
