manualshive.com logo in svg

Emerson Rosemount 3101, Reference Manual

Share
Download
Emerson Rosemount 3101 Reference Manual Download Page 66

54

Reference Manual

00809-0100-4840, Rev CB

Section 4: Starting up

February 2015

Starting up

4.4.16

Setting the 4 and 20 mA levels using ranging
(on the 3102/3105)

Screen display:

(SEt 4 and SEt 20)

If you have already programmed the 4 and 20 mA levels as above, you do not need to enter this 
menu. All the programming is now complete and you should press the red button 

 to exit the 

programming menu and return to the main PV display.

If, however, you wish to set the 4 or 20 mA level by ranging the instrument to a known target - 
perhaps the level in the vessel at this time - then press the blue button 

 to enter this menu.

Note

The “SEt 4” menu option is in the programming menu. See 

Figure C-2 on page 103

 for a map of 

the menu structure and how to access the menu options.

To set the 4 mA level

1.

If entering the menu system from the PV display, press the green button 

 repeatedly 

until the “SEt 4” menu option is indicated (see the note above).

2.

Press the blue button 



to display the PV at 4 mA.

3.

If the value is correct, press the red button 

 and then the green button 



to get to the 

next menu option. Otherwise, continue with step (

4

).

4.

With the transmitter aimed at a target a distance away equivalent to the 4 mA level, 
press the blue button 

 to start the ranging. The display alternately flashes “4” and the 

live measurement reading.

5.

Press the blue button 

 to confirm the PV at 4 mA is to be changed to the same value as 

the live measurement reading.

6.

Press the red button 

 to save if the new value is correct, or press the blue button 

 to 

not save. Afterwards, depending on the button pressed, either the “SEt 4” menu or the 
next menu “SEt 20” appears.

Note

The “SEt 20” menu option is in the programming menu. See 

Figure C-2 on page 103

 for a map of 

the menu structure and how to access the menu options.

To set the 20 mA level

1.

If entering the menu system from the PV display, press the green button 

 repeatedly 

until the “SEt 20“menu option is indicated (see note above.)

2.

Press the blue button 



to display the PV at 20 mA.

3.

If the value is correct, press the red button 

 and then the green button 



to get to the 

next menu option. Otherwise, continue with step (

4

)

4.

With the transmitter aimed at a target a distance away equivalent to the 20 mA level, 
press the blue button 

 to start the ranging. The display alternately flashes “20” and 

the live measurement reading.

Summary of Contents for Rosemount 3101

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands