14
Open the Cassette Door and
insert a good quality blank
cassette tape into the slots on the
door, with the open end facing up
and the full reel on the right-hand
side. Close the cassette door.
Full Reel on Right
Open Surface Side
1
When you are ready to begin
recording, press the cassette
RECORD (
) button. The cassette
PLAY (
Ã
) button will also engage.
The tape will begin moving and all
of the material from your selected
source will be recorded on the tape.
3
Press the FUNCTION button to
select the function you wish to
record, either radio or CD, and
operate that function according to its
own instructions.
2
MAKING A TAPE RECORDING
The tape recorder in this unit allows you to make direct recordings from the radio or CD player to a blank
cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically
control the volume level of your recordings to prevent distortion. You may change the settings of the VOLUME
control or the BASS BOOST button during a tape recording, as these controls have no effect on the material
being recorded onto the tape.
To make a tape recording, proceed as follows:
To avoid recording unwanted
material, such as radio
commercials, use the PAUSE (
)
button to stop the recording
temporarily. Release the pause
(
) button to begin recording
again.
4
When you are finished recording,
press the STOP/EJECT (
)
button to stop the tape.
5
OPERATING INSTRUCTIONS (CONTINUED)
