16
Listening To The Radio
1.) Press the
POWER
button to turn the unit ‘On’.
The display lighting comes ‘On’ and the
display briefly shows “
HELLO
”.
2.) Press the
FUNCTION
button to select the
TUNER
function.
An
AM
or
FM
frequency will appear on the
display.
Press the
TUNER
/
BAND
button again to
switch between the
AM
and
FM
bands if
necessary.
3.) Tune to the desired station as follows:
•
Manual Tuning
Repeatedly press the
or
SKIP/TUNING
buttons until the display shows
the exact frequency of the desired station. Use the Manual Tuning method to
tune to weak or distant stations that are not strong enough to be recognized by
the Automatic Tuning system.
•
Automatic Tuning
Depress and hold the
or
SKIP/TUNING
buttons until the display begins
to move, then release the buttons. The Tuner will search up or down the band
for the next strong signal and stop on that station. Repeat this procedure until
the tuner stops on your desired station.
4.) If you tuned to an FM Stereo station the
ST
indicator will appear in the display. If the FM
Stereo reception is noisy or weak, press the
MODE/FIND
button on the remote control to
select the FM Mono mode.
5.) Adjust the
VOLUME
,
DBBS
and
EQ
controls to the desired settings.
6.) When you are finished listening press the
POWER
button to return the unit
to the Standby (Off) mode. The display lighting goes ‘Off’ and the display changes
from radio frequency to correct time.
PD3689_062005.p65
20/6/2005, 16:18
16
