1 6
Setting The Clock
When the unit is connected to the AC outlet for the
first time “
– –:– –
” flashes on the display.
Note
: Do not turn the main unit power ‘On’. The clock can only be set while
the main unit power is ‘Off’.
1.) Press and hold the
PRG.
button. The “
12H
” flashes on display.
Press
or
button to select between “
24H
” 24-hour mode (no AM/PM
indicators) or “
12H
” 12-hour mode (with AM/PM indicators) as desired.
2.) Press the
PRG.
button again. Just the Hour digits
will continue flashing.
3.) Press the
or
button to set the display to the correct hour,
,
AM
or
PM
.
4.) Press the
PRG.
button again. The Minute digits
will begin flashing.
5.) Press the
or
button to set the display to the correct minutes.
6.) Press the
PRG.
button once more.
Only the colon (“
:
”) continues flashing and the clock
begins to run.
PD3686_021705r.p65
17/2/2005, 16:14
16
